Red, yellow and K white are my ideal colors for night time. Apr 26, Posts: Please make sure that you are posting in the form of a question. It's not a big market, but it exists. Is there a better way to do it? Can't justify buying these bulbs anymore.
Hazardous Waste Warning
Several of the spectral peaks are directly generated from the mercury arc. While Becquerel was interested primarily in conducting scientific research into fluorescence, Thomas Edison briefly pursued fluorescent lighting for its commercial potential. When used in this fashion, they are fitted with filters in the same way as blacklight-blue lamps are; the filter passes the short-wave UV and blocks the visible light produced by the mercury discharge. As in all mercury-based gas-filled tubes , mercury is slowly adsorbed onto the glass, phosphor, and tube electrodes throughout the life of the lamp, until it can no longer function. Heavily loaded small lamps, such as compact fluorescent lamps, also include heat-sink areas in the tube to maintain mercury vapor pressure at the optimum value. The first phosphors were synthetic versions of naturally occurring fluorescent minerals, with small amounts of metals added as activators.
T-4 Ultra Slim Fluorescent Tubes | VITAMIND3.INFO
We've made returning items as easy as possible. Many compact fluorescent lamps integrate the auxiliary electronics into the base of the lamp, allowing them to fit into a regular light bulb socket. A few manufacturers are producing T8 lamps with 90, hour lamp lives, rivalling the life of LED lamps. At much lower or higher temperatures, efficacy decreases. This is due to a dynamic instability inherent in the negative resistance of the plasma source,  which can be from a bad lamp, a bad ballast, or a bad starter; or occasionally from a poor connection to power.
Description: In addition to general lighting, special fluorescent lights are often used in stage lighting for film and video production. Some more advanced starters time out in this situation, and do not attempt repeated starts until power is reset. However, there are also tubes that operate in cold cathode mode, whereby electrons are liberated into the tube only by the large potential difference voltage between the electrodes. This is used with electronic ballasts shown below.